Material Analysis

Material Analysis include organic and inorganic materials,covering,metal,plastic,rubber,fiber,
paint,ink,glue,additives and various organic solvents,and component analysis of other special materials.ANBOTEK can provide component analysis,Metal Identification,element analysis,material comprehensive analysis and SDS service.

Organic Material component analysis

Polymer Analysis

Plastic:Polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), polyurethane (PU), polyamide (PA), polyoxymethylene (POM), polyphenylene sulfide (PPS), polycarbonate (PC), polymethyl methacrylate (PMMA), polyethylene terephthalate (PET),etc.

Rubber: Chloroprene rubber (CR), natural rubber (NR), styrene-butadiene rubber (SBR), butyl rubber (IIR), nitrile rubber (NBR), ethylene propylene rubber (EPM).etc

Fibers: cotton, linen, wool natural fiber, viscose fiber, acetate fiber and other synthetic fibers

Coating component analysis

Waterborne coatings, powder coatings, heat resistant coatings, waterproof coatings, paint additives, etc.

Organic solvents analysis

Paint thinner,paint remover,cleaning agents and solvents in electronic and electrical industries.

New chemicals,additives,and other additives.

Flux,Poloshing agents,surgactants,Auxiliaries,etc.

Organic material component or elements analysis

Organic material principal component analysis

Principal component analysis always used to identify the material category,and improving product quality.

Inorganic filler analysis of polymer materials 

Mainly including inorganic oxides analysis of polymer materials,inorganic pigments and fillers(suchas black Carbon,Silica,magnesium oxide,calcium oxide,zinc oxide,titanium oxide,glass fiber,etc) and inorganic salts(calcium carbonate,silicates,etc)

Elements analysis of organic materials

Elements testing,like Silicon,Magnesium,Aluminum,Calcium,Lead,Cadmium,Arsenic,etc.,or elements testing of organic liquids or other materials per client’s requirement..

Natural latex testing

Natural latex testing in Medical devices:Medical gloves,mouth and nasal airway,intravenous catheters,masks,blood pressure cuff;

Natural latex testing in consumer goods,such as:eraser, rubber bands,pacifiers,wash gloves,handles and cushions.

Asbestos Testing

Asbestos is classified as a carcinogen.Many countries develop related regulation or control measure on it.ANBOTEK can provide Asbestos testing in all kinds of materials.

The main equipment for organic material analysis used includes:

Fourier Transform Infrared Spectrometer

Pyrolysis Gas Chromatography-Mass Spectrometry

High Performance Liquid Chromatography

Thermogravimetric Analyzer

Scanning Electron Microscope with Energy Disperse Spectroscopy

Ultraviolet Visible Spectrophotometer

Liquid Chromatography


Metal Analysis

Metal analysis mainly provide elements component information in the metal and metail grade identification

Black metal grade identification and elements analysis

Stainless, structural, carbon, alloy, and die steels

Copper alloys

Alluminum alloys

Tin alloys

Nickel alloys

Magnesium alloy

Titanium alloy

Non-ferrous metals

Copper alloys,Alluminum alloys,Tin Alloys,Nickel Alloys,Magnesium Alloys,Titanium Alloys,Zinc Alloys,etc.

Elements analysis in inorganic materials

Plating testing:Metal plating and plastic plating analysis

Element analysis of powder testing (lithium cobalt oxide, antimony trioxide, lead trioxide)

Element of welding solder testing (silver-based solder, copper-based solder)

Element of solder paste

The main equipment used in inorganic material analysis are:

Inductively Coupled Plasma- Atom Emission Spectrometer

Atomic Absorption Spectrometer

Spark direct-reading spectrometer

CS Analyzer

Constant potential electrolyzer


Gravimetric Method

The Safety Data Sheet (SDS) is the main hazard communication tool in the supply chain of substances and mixtures. SDSs are an important resource for manufacturers and provide a wide range of information including material identity, hazard identity, emergency information, prevention of hazardous situations, etc.

MSDS Specification:

1. MSDS content under US OSHA standards

Section 1. Manufacture's Name and Contact Information

Section 2. Hazardous Ingredients

Section 3. Physical/Chemical Characteristics

Section 4. Fire and Explosion Hazard Data

Section 5. Reactivity Data

Section 6. Health Hazard Data

Section 7. Precautions for Safe Handling and Use

Section 8. Control Measure

2. MSDS content under Canada WHMIS standards

Section 1. Product and Company Information

Section 2. Hazardous Ingredients

Section 3. Physical Data

Section 4. Fire or Explosion Data

Section 5. Reactivity Data

Section 6. Toxicological Properties

Section 7. Preventative Measures

Section 8. First Aid Measure

Section 9. Preparation Information

3. MSDS content under US ANSI and ISO

Section 1. Chemical Product & Company Information

Section 2. Composition/Information on Ingredients

Section 3. Hazards Identification

Section 4. First Aid Measures

Section 5. Fire Fighting Measures

Section 6. Accidental Release Measures

Section 7. Handling and Storage

Section 8. Exposure Controls/Personal Protection

Section 9. Physical and Chemical Properties

Section 10. Stability and Reactivity

Section 11. Toxicological Information

Section 12. Ecological Information

Section 13. Disposal Considerations

Section 14. Transport Information

Section 15. Regulatory Information

Section 16. Other Information

ANBOTEK service:

MSDS making

MSDS audit

MSDS translation




Copyright 2004-2014 Anbotek Compliance Inc.